Advertisement
TRACKING A/V
SLOW
Notes:
If there is a noise bar in the picture during still
or slow motion play, press the SLOW button
and then press the TRACKING A/V button
until the noise is reduced.
To prevent tape damage, the VCR will switch
from the still/slow mode to the stop mode after
about 1 minute.
Auto Tracking
When playbackis started, the auto tracking
function operates and adjusts tracking
automatically so the picture is optimized.
Auto tracking may not operate correctly when
the tape is scratched or the recorded condition
"
is poor. In this case, press the TRACKING
&
(A/V) button to adjust tracking.
=
<q
co
Lu
a
o
2
"
CH1/2 select button
=
CH1/2
PDC
Ay
Bt Whenplaying stereo or monaural tapes
Press the CH1/2 select button on the remote
control handset so that both the
and
indicators on the front panel of the VCR lights up.
When only the
(or Bi) indicator lights, only
the left (or right) audio channel of the Hi-Fi track
is heard.
When both @ and
indicators do notlight,
the sound on the mono audio track is heard.
@ Whenplaying backbilingual broadcasts
Select the required language by pressing the
CH1/2 select button.
Whenonly the © indicator lights, the main
language is heard.
¢ When only the
indicator lights, the sub
language is heard.
¢ When both 0 and
indicators light, the main
language and sub language are heard.
« When both
or
indicators do not light, the
mono audio trackis heard.
Advertisement
