Advertisement
"PREPARE - REC" function allows you to easily prepare the VCR to record signal from satellite/cable
decoder, without setting the timer programme. This avoids the necessity of doing timer programming
twice. (For the decoder and the VCR).
Controls
VCR's Display
1
Firstly, the scart cable or from the decoder must
"
be connectedto L2 (the blue socket behind the
set).
'
Then set the PREPARE REC mode in the menu to
on (Vv). See page 44.
Set the timer and channel on the satellite decoder
button for more than 3 seconds.
The VCR willdisplay"K EP
oo".
The VCR is now ready to receive and record signal
from the satellite decoder.
At the programmedstart-time, the decoder will
activate your VCR to start recording.
Subsequently, the decoder will signal the VCR to
stop recording and to shut-off.
To cancel the PREPARE REC setting, you can do
one of the following:
a) Enter the OSD menu and turn PREPARE REC to
2
off (-).
b) Eject the tape.
c) If recording has not yet started, by pressing
7
VCR/TV for more than 3 seconds.
d) If recording has already started, by pressing the
OPERATEbutton, followed by STOP button
within 10 seconds.
Please Note:
Notall satellite receivers support this function.
Advertisement
