Advertisement
Sometimes problems can besolved easily by checking a few basic things.
Check below before you call for help or take your unit to your dealer.
No power
* Check to see if the VCR is plugged into an AC mains socket.
Does not respond to remote control handset
* Checkto seeif there are batteries in the handset, their polarities are correct, and they
are fitted correctly.
* The handsetis not aimed at the VCR.
* Weak batteries in the handset.
Will not record
* No cassette in the VCR.
4
* Safety tab removed from cassette.
(In this case, the cassette will be ejected.)
Will not playback
* No cassette in the VCR.
* For playback, TV must be tunedto the video programme number (See page 11).
* Set the TV to the video input mode when the VCR and TV are connectedvia a Scart
connector (see your TV manual).
* Press the VCR/TV button on the remote handsetto display the VCR indicator in the VCR
display when the VCR and TV are connected via a Scart connector.
Snowy/Noisy picture
* Makesurethe TV i s fine tuned.
* Head cleaning may be required. See "MAINTENANCE".
* Some snowor streaks are normal during visual search, still and slow playback.
Will not make timer recordings
The VCR should be in the standby modeto activate timer recording.
« Programmesentered incorrectly.
* Clock wasnot set correctly.
* Programme exceededcassette length.
* No cassette or cassette's safety tab removed.
Clock shows — — :— —
¢ Power interrupted.
Poor/Nopicture in normal TV viewing
* Carefully check aerial connection.
Indication of the VCR display appears abnormal/No button can be engaged
_
« Push the reset switch using a toothpick,etc.
The display will be reset. Then set the information again.
Auto installation not function
¢ MlIS-operate the auto installation in page 10.
For Recovery, refer page 12.
Advertisement
