Grilling - Silvercrest STGE 2000 A1 Operating Instructions Manual

7) Plug the mains plug into an easily accessible mains socket .
8) Turn the heat level control 6 to MAX and let the appliance heat up for
approx . 5 minutes without food . The operating light 7 lights up to show that
the appliance is heating up . It goes out as soon as the selected temperature
has been reached .
NOTE
► Depending on the room temperature, heating up will start at different
positions on the heat level control 6 .
► The operating light 7 may come on and go out several times during
this process . This is not a malfunction of the appliance! It merely indi-
cates that the appliance is maintaining the set temperature .
► Before first use, allow the appliance to heat up to the maximum
temperature setting for approx . 15 minutes without food . This removes
the protective layer on the heating element . It also means that when the
appliance is heated up for the first time, a small amount of smoke and
smell may be generated . This is normal and is completely harmless .
Ensure that there is adequate ventilation .
The appliance is now ready for use .

Grilling

WARNING!
► To prevent the appliance from overheating, do not place any materials such
as aluminium foil, aluminium trays, plates or the like on the cooking grill 1 .
There is a risk of fire!
► As soon as the water level falls below the MIN mark after extended use,
top up the water . There is a risk of fire! Disconnect the power plug from
the mains power socket and carefully fill the water up to the MAX mark .
Do not pour water over the hot heating elements, otherwise they could be
damaged .
► The surfaces of the appliance become very hot during use . During opera-
tion, touch the appliance only on the heat level control 6 or on the side
handles . There is a risk of burns!
1) Proceed as described in the section Setting up .
STGE 2000 A1 GB │ IE │ 9 ■