Opening The Svp Console - Fujitsu BS2000 SE Series Operating Manual

Server Unit /390

4.1 Opening the SVP console

> Proceed as follows to log in on the SE Manager as an administrator: When you log in as an operator, the
account must have the SVP right.
After you have logged in successfully, you can access the functions of the SE Manager and consequently
also those for operating the operating system (BS2000 or VM2000) on the Server Unit.
> Select Systems ->
> Click Open in the
can also be obtained in the SE Manager's help.
A new window opens in which a terminal emulation sets up the connection to the SVP console:
> Confirm connection setup with the ENTER key.
After a brief wait time, the SVP frame below is displayed:
After the server has been started: the MODE SELECTION FRAME (see
After the SVP console has been closed and opened again or when an SVP console has already been opened by
another user: the last frame displayed.
[ <se server> (SE<model>) -> <su-name>(SU</390>), SVP console
SVP console group to open a window with the SVP console. Information on console access
]
"(ML) MODE SELECTION FRAME"
tab.
)
10