Using Svp Frames - Fujitsu BS2000 SE Series Operating Manual

Server Unit /390

4.3 Using SVP frames

You assign a job to the SVP by invoking the relevant frame, selecting the desired function, and specifying the
required parameters. To select a function or specify a parameter, you must enter the alphanumeric characters
shown in the frame in the input fields marked by an arrow ( ). After you have completely filled out an input field
=>
with limited length, the cursor automatically switches to the next entry field. You can select entry fields manually
with the tabulator key or arrow keys. Once you have entered all the functions and parameters assigned to a job,
press the ENTER key. In some frames, SVP functions can also be initiated by actuating the corresponding function
key (also known as pfkey).
Instead of selecting a function, you can also enter a command in the command input line in all frames (screen line
24) and assign a job to the SVP in this way. Frames can also be selected using the FR'BLANK'Frame-ID , e.g.
FR ML (to switch to the MODE SELECTION FRAME, in upper or lower case). A command entered in line 24 takes
priority over a selected frame function.
19