Hnc (High-Speed Net Connect) - Fujitsu BS2000 SE Series Operating Manual

Server Unit /390

5 HNC (High-speed Net Connect)

The High-speed Net Connect (HNC for short) connects the Server Unit /390 to the LAN. Furthermore, as net client
the HNC permits access to the Net-Storage. The HNC is managed using the SE Manager.
The internal disks, power supply units, and fans are redundant in design and can be replaced during ongoing
operation.
The rack console serves as a monitor for the Management Unit and consequently as a local access to the
administrative and operating functions of the SE server. When necessary (in the event of maintenance), the rack
console can also be attached to the HNC using the KVM switch.
The HNC software is preinstalled ex works.
HNC redundancy is possible as an option. Up to four HNCs can be integrated.
Detailed information on operating the HNC is provided in the "Operation and Administration" manual [ ]. 7
Detailed information on the various hardware components and interfaces of the HNC is provided in the data sheet
"FUJITSU Server BS2000 SE Series".
See the product site for the relevant server at http://www.fujitsu.com :
Go to Products -> Servers -> BS2000 -> FUJITSU Server BS2000 and select SE700 / SE710 or SE500.
With the release of basic software version 6.2A, a new HNC hardware generation has been introduced as well:
HNC M2. With the release of version 6.3 another hardware generation (HNC M3) is used. Any differences to HNC
M1 are described in this manual. In all other cases, this manual only refers to HNC, irrespective of the hardware
version M<x>.
73