Fujitsu BS2000 SE Series Operating Manual page 35

Server Unit /390
Frame-specific functions
ENTER Sets operating mode.
> After selecting the firmware to be loaded in the
EXECUTION ==>
The following prompt appears on the screen:
***********************************
*
* ARE YOU SURE ? (ENTER Y OR N) N *
*
***********************************
!
CAUTION!
The operating mode must not be reset during system operation! If this instruction is not
heeded, BS2000 will be aborted!
> Press the Y key to reload the firmware, or the N key to cancel the procedure. Confirm your entry
with the ENTER key.
> After reloading the firmware, click on the PF9 key to carry out IPL in PROGRAM LOAD FRAME:
DETAIL-1.
RETURN Swap to PROGRAM LOAD FRAME: BASIC (see
PF9 Swap to PROGRAM LOAD FRAME: DETAIL-1 (see
without saving the changes you have made.
field, press the ENTER key.
*
*
field and entering
VM MODE ==>
"(LD) PROGRAM LOAD FRAME: BASIC"
"(LD) PROGRAM LOAD FRAME: DETAIL-1"
in the
2 IPL
)
)
35