Setting Operating Mode Via Program Load Frame: Detail-2 - Fujitsu BS2000 SE Series Operating Manual

Server Unit /390

4.5.6 Setting operating mode via PROGRAM LOAD FRAME: DETAIL-2

The operating mode can be set anew according to the setting using PROGRAM LOAD FRAME: DETAIL-2. This
selects the appropriate firmware for running BS2000 or VM2000.
The following are specified in the example below:
VM2000 operating mode
executing IPL after reloading the firmware
Requirement
You are in the PROGRAM LOAD FRAME: DETAIL-1 screen.
Invoke the PROGRAM LOAD FRAME: DETAIL-2 screen
Click on PF9
The PROGRAM LOAD FRAME: DETAIL-2 screen is displayed:
-VM MODE-
==> 2
>*1 NATIVE
*2 AVM/EX
RA
Figure 33: PROGRAM LOAD FRAME: DETAIL-2 screen
VM MODE ==>
IPL EXECUTION ==>
----- PROGRAM LOAD FRAME: DETAIL-2 -----
CL-0 CPU-0 CHP-0
Enter for VM2000 operation
2
Enter 1 for executing IPL
-IPL EXECUTION-
==> 1
>*1 ENABLE
*2 DISABLE
*ENTER EXECUTE
*PF3 GO TO BASIC FRAME
*PF9 GO TO DETAIL-1
RUN
[]-[]00
E90L01G
71