Au2) Auxiliary Frame: Iorsf Control - Fujitsu BS2000 SE Series Operating Manual

Server Unit /390

4.4.8.2 (AU2) AUXILIARY FRAME: IORSF CONTROL

Figure 18: AUXILIARY FRAME: IORSF CONTROL screen
The IORSF files are displayed in this frame. The file number of the current IORSF is displayed in the CURRENT
field.
NO. =
When you select a function and press the ENTER key, parameters are requested in the other input fields. Once you
have entered the parameters and pressed the ENTER key, the functions for the IORSF files are executed.
FUNCTION => The following function is selected after the corresponding number has been entered:
SET NO
1
2 PROTECT
3 SWAP
4 SAVE
5 RESTORE
NEXT POWER ON RESET
NO. =>
selects an IORSF. Entry of the set number in the
For activation, an IMPL is required (see AU4 frame on
POWER STAND-BY/IMPL"
engages/disengages IORSF protection from being overwritten:
After selecting function 2, enter
swaps two IORSFs: enter the numbers in the SPECIFY SWAP
NO.'blank''blank'<=>'blank''blank'
saves one or all IORSFs: enter the number or the value
SAVE NO. OR A(ALL) ==> 'blank'
restores an IORSF: enter the numbers in the field RESTORE NO. ==> 'blank'
Enter the number of the IORSF file which is to be activated after the next IMPL.
You can only make an entry if you select function
NEXT POWER ON RESET NO. =>
).
(Protect) or (Unprotect) before the appropriate number
P U
fields.
"(AU4) AUXILIARY FRAME:
(All) in the field
A
beforehand.
1
field.
48