Honeywell ScanPal EDA71 User Manual page 20

Enable Airplane Mode
If you do not need to connect to any wireless networks, you can enable Airplane
mode to turn Off the radios and save battery power.
1. Swipe up from the bottom of the Home screen to access all apps.
2. Tap Settings
3. Tap the toggle button next to Airplane mode. An airplane icon appears in the
Power on the Tablet
After you have fully charged and installed a battery, power on the tablet for the first
time:
•
Unlock the Screen
The screen lock automatically activates every time the tablet is powered on or when
the tablet wakes from sleep mode. The level of security provided depends on the
type of lock set (e.g., Swipe, Pattern, PIN, or Password).
The default setting is Swipe, which provides no protection against unauthorized
access to your tablet.
•
Change the Screen Lock to Protect the Tablet
After you start using the tablet, you should change the screen lock to prevent
unauthorized persons from accessing the tablet after the screen lock activates
unless they input the correct password, pin, or pattern.
The recommended setting for the Screen lock is to enable a Password lock. Use a
strong password value (e.g., include numbers, characters, special characters, and
mix character case).
1. Swipe up from the bottom of the Home screen to access all apps.
2. Tap Settings
10
> Network & Internet > Advanced.
status bar to indicate Airplane mode is turned On.
Press and hold the Power button for approximately 3 seconds, and then release
the button.
On the lock screen, swipe up from the bottom of the screen.
> Security > Screen lock.
EDA71 User Guide