Honeywell ScanPal EDA71 User Manual page 73

USB Troubleshooting
•
•
How to Share Your Mobile Data Connection
You can share the mobile data connection through USB tethering or Bluetooth
tethering. You can also use the tablet as a Wi-Fi hotspot to share the connection
with other devices.
Share the Data Connection Through USB or Bluetooth
You can share your data connection with another device through tethering. After
you connect the tablet to another device through a USB connection, you can share
the tablet's data connection through USB tethering. Or, if the device is Bluetooth-
capable, you can configure the tablet to share the data connection with the device
through Bluetooth tethering.
1. Prepare the devices.
2. Swipe up from the bottom of the Home screen to access all apps.
3. Tap Settings
4. Select the type of tether to initiate:
Note: To stop sharing the connection, disconnect the USB cable, or tap USB tethering or
Bluetooth tethering again to turn Off the feature.
EDA71 User Guide
If you have a problem with your workstation tablet recognizing the USB device,
try downloading and installing the Honeywell-aidc-usb-driver. The driver is part
of the Honeywell_Mobility SDK_Android software.zip file. To learn where to get
the software, see Developer Information
Check to make sure you have enabled the USB for file transfer. To learn more, see
How to Transfer Files
• For USB - Connect the tablet to another device through an EDA71 accessory
and USB communication cable. Make sure your USB connection is set to File
Transfer instead of Charging.
• For Bluetooth - Pair your EDA71 with another Bluetooth enabled device.
Make sure the other device is set to use a network connection by Bluetooth.
> Network & internet > Hotspot & tethering.
• Tap USB tethering.
• Tap Bluetooth tethering.
The devices is now sharing the tablet data connection.
on page 64.
on page 15
63