Honeywell ScanPal EDA71 User Manual page 66

•
About Network Communications
You can easily add the tablet to your wireless or wired data collection network.
Connect the EDA71 your tablet using:
•
•
•
•
Connect to a Wi-Fi Network
The tablet contains an 802.11 a/b/g/n/ac radio to transfer data using wireless
communications. Before you connect to a Wi-Fi network, you need to know about
your network security protocol and its required credentials.
By default, the 802.11 radio is disabled.
1. Swipe up from the bottom of the Home screen to access all apps.
2. Tap Settings
3. Tap Off
4. On the list, tap a network name to initiate a connection.
5. Enter any required information if the network is secured (e.g., password, key or
6. Tap Connect.
Once you connect to a saved Wi-Fi network:
•
•
56
View device-specific information including the model number, phone number,
operating system version, software patch version, radio versions, build number,
IP address, Wi-Fi MAC, Bluetooth Address and legal information.
Mobile network
802.11 a/b/g/n/ac radio communications.
Bluetooth communications.
USB communications.
> Network & Internet > Wi-Fi.
to toggle Wi-Fi radio On
To add a network if it does not appear on the list:
a. Navigate to the end of the discovered network list, and then tap
Add network.
b. Type the Wi-Fi network name (SSID).
c. Choose a security protocol and add any required information.
d. Tap Save.
certificate name).
Tap the network name on the list to view details (e.g., status, signal strength,
speed, frequency, security type). Select
The tablet automatically connects to the same network when the network is in
range and the WLAN radio is turned On.
. A list of discovered networks appears.
to close details screen.
EDA71 User Guide