Honeywell ScanPal EDA71 User Manual page 88

Focus
Symbology
13 mils 100% UPC-A
13 mils 20% UPC-A
15 mils Code 128
10 mils Data Matrix
5 mils PDF 417
6.7 mils PDF 417
15 mils QR
N6703 Imager Engine Field of View/Resolution
Focus
Horizontal Field Angle (degrees)
Vertical Field Angle (degrees)
Note: DPI can be calculated based on the following formula:
Horizontal DPI = 832 pixels/width of horizontal field of view (inches) Vertical DPI =
640 pixels/width of vertical field of view (inches)
N3601 Imager Engine Reading Distances
The depth of field measurements were taken using these parameters:
Note: Time to Read and Depth of Field are impacted if the barcode symbol is at the edge of
the image.
78
in.
in.
mm
in.
in.
in.
in.
in.
• Distances are measured from the top of the engine to the barcode
• 23 °C (+73 °F), 10K lux
• Clear, High quality barcodes
Standard Range
Near Distance
mm
mm
mm
mm
mm
mm
48
31
Far Distance
44 573
1.73 22.56
79 228
3.11 8.98
42 650
1.65 25.59
72 297
2.83 11.69
105 181
4.13 7.12
84 244
3.31 9.61
39 414
1.54 16.30
EDA71 User Guide