1. Under the drive module, select "PROFIsafe" and using the righthand mouse key, call up
2. Define the address area of the PROFIsafe telegram under the "Addresses" tab. The start
3. On the "PROFIsafe" tab, you can define the F parameters required for F communication.
Safety Integrated
Function Manual, (FHS), 11/2009, 6SL3097-4AR00-0BP0
the properties of the PROFIsafe slot.
address for inputs and output is the same. To confirm your entries, choose "OK".
Figure 7-32
Setting PROFINET addresses
If the "PROFIsafe..." tab is inactive, then you can activate this button for control using the
"Activate..." button.
Figure 7-33
Setting F parameters
Commissioning
7.5 PROFIsafe via PROFINET
161