Set Default Low Frequency - Motorola MC145220EVK Manual

Set Default Low Frequency

ARCHIVED BY FREESCALE SEMICONDUCTOR, INC. 2005
This is the resulting screen that is displayed after the user selects the '[W] Change default low freq.' com-
mand. The user is prompted to enter the new default low frequency value.
Entering a new value does not change the current output frequency of the target board. Changing the low
frequency simply adjusts the low frequency setting available from the main menu. The '[L]! Set to low
freq.' command changes the current output frequency.
The screen is similar for the Y and Z commands except that the prompts specify medium or high frequen-
cy, respectively.
Available Boards – Current target board is: A, MC145220 Dual
Brd [A]!: MC145220 Dual
––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
Input new default low frequency in integer values of MHz, kHz, and Hz.
Original program default low frequency is 60 MHz
Current low frequency is 60 MHz
New default low frequency: 60 MHz + 000 kHz + 000 Hz
[TAB] to move to next field
[Q] to return to main menu
This screen shot is a representative sample of the screens within this program. To access this screen
with the MC145220 Dual EVK selected in the "Define boards to program" screen, press [Q]! . This will
place you in the "Select from the available options" screen. To access the screen shown above, press
[W].
This sequence to access the "Set default low frequency" screen works the same for any selected board
in the "Define boards to program" screen.
MC145220EVK
24
Freescale Semiconductor, Inc.
Welcome to MC145xxx EVK Demonstration Program, rev 4.0
Set default low frequency
Brd [–]!: N/A
[X]! Terminate demonstration program. [?]! View help screen.
For More Information On This Product,
Go to: www.freescale.com
Brd [–]!: N/A
MOTOROLA