Change C Register, Pd Out Current - Motorola MC145220EVK Manual

Change C Register, PD out Current

ARCHIVED BY FREESCALE SEMICONDUCTOR, INC. 2005
This is the resulting screen that is displayed after the user selects the '[N] Change C Register and Pres-
cale' and then the '[2] Change PD out Current' command. The user is provided a submenu to select from.
This submenu contains commands to change the PD out current settings.
The screen is slightly different depending on whether Output A is defined as a port or not. See command
[E] from the main menu. Note in '220 dual mode, PD out current for PLL and PLL is modified simulta-
neously by the software program.
The current PD out setting is displayed as '5%', '50%', '80%', or '100%'.
The user can select the [0], [1], [2], and [3] menu options to change the percent of PD out current.
If the [Q] command is selected, then the user is returned to the main menu.
Available Boards – Current target board is: A, MC145220 Dual
Brd [A]!: MC145220 Dual
––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
Evaluation program modifies PDout Current on both PLL's for this board.
Change C Register, PDout Current – Currently: 100%
[0]! 5%
[1]! 50%
[2]! 80%
[3]! 100%
[Q] to return to previous menu
This screen shot is a representative sample of the screens within this program. To access this screen
with the MC145220 Dual EVK selected in the "Define boards to program" screen, press [Q]! . This will
place you in the "Select from the available options" screen. In this screen, press [N]. This will place you
in the "Change C Register and Prescale" screen. To access the screen above, press [2].
MOTOROLA
Freescale Semiconductor, Inc.
Welcome to MC145xxx EVK Demonstration Program, rev 4.0
Change C Register, PDout Current
Brd [–]!: N/A
[X]! Terminate demonstration program. [?]! View help screen.
For More Information On This Product,
Go to: www.freescale.com
Brd [–]!: N/A
MC145220EVK
27