[Y] Change Default Medium Frequency - Motorola MC145220EVK Manual

[Y] Change default medium frequency

ARCHIVED BY FREESCALE SEMICONDUCTOR, INC. 2005
To access this command in the program, select a board in the "Define boards to program" screen and
then press [Q]! . This will place you in the "Select from the available options" screen. The command [Y]
is on this screen.
See page 21 of this document for a sample screen shot of this command.
This command prompts the user to input a decimal value in MHz for the default medium frequency. The
program default medium value is displayed along with the current value. The user may leave the medium
frequency value as is by entering return without a value. The program medium default value is depen-
dent on the targeted board type. (See Table 5.)
This value is not sent to the board at this time. It is the value that is sent to the board when the [M] com-
mand is executed.
MC145220 in Single Loop Mode
MC145220 in Dual Loop Mode
MOTOROLA
Freescale Semiconductor, Inc.
Board Type
MC145190
MC145191
MC145192
MC145200
MC145201
MC145202
For More Information On This Product,
Go to: www.freescale.com
Table 5.
Program Default Medium Frequency
746 MHz
738 MHz
738 MHz
1492 MHz
1476 MHz
1476 MHz
738 MHz (PLL)
805 MHz (PLL )
70 MHz
MC145220EVK
35