[N] Change C Register and Prescale
ARCHIVED BY FREESCALE SEMICONDUCTOR, INC. 2005
To access this command in the program, select a board in the "Define boards to program" screen and
then press [Q]! . This will place you in the "Select from the available options" screen. The command [N]
is on this screen.
See page 26 of this document for a sample screen shot of this command.
This command displays a submenu with the next seven options displayed. This is where the user can
modify the C register settings.
[0] Change output A – (Port)
To access this command in the program, select a board in the "Define boards to program" screen
and then press [Q]! . This will place you in the "Select from the available options" screen. Press [N],
which will place you in the "Change C Register" screen. The command [0] is on this screen.
This is only available with Output A configured as a port for the currently targeted board. See [A][0]!
command. Command not available in dual mode.
[0]! Reset output A to 0
This resets the PORT field of register C (C
targeted board.
[1]! Set output A to 1
This sets the PORT field of register C (C
targeted board.
[1] Change output B (Out B) (not available on '220)
To access this command in the program, select a board in the "Define boards to program" screen
and then press [Q]! . This will place you in the "Select from the available options" screen. Press [N],
which will place you in the "Change C Register" screen. The command [1] is on this screen.
Selects the logic state of output B.
[0]! Reset output B to 0
This resets the OUTB bit of register C (C 0 ) to 0 and then writes register C to the currently
targeted board.
[1]! Set output B to 1
This sets the OUTB bit of register C (C 0 ) to 1 and then writes register C to the currently tar-
geted board.
MC145220EVK
40
Freescale Semiconductor, Inc.
For More Information On This Product,
Go to: www.freescale.com
) to 0 and then writes register C to the currently
1
) to 1 and then writes register C to the currently
1
MOTOROLA