Table of Contents
Advertisement
[2] Change PD out current with Output A defined as port (not available on '220)
ARCHIVED BY FREESCALE SEMICONDUCTOR, INC. 2005
To access this command in the program, select a board in the "Define boards to program" screen
and then press [Q]! . This will place you in the "Select from the available options" screen. Press [N],
which will place you in the "Change C Register" screen. The command [2] is on this screen.
If A 23 , A 22 are both 0 then the currently targeted board is set up as a port and the following sub–
menu options are provided:
[0]! 70%
The PD out field of register C (bits C 3 and C 2 ) is set to 00 binary while the remaining bits of
register C are preserved and the C register is written to the targeted board.
[1]! 80%
The PD out field of register C (bits C 3 and C 2 ) is set to 01 binary while the remaining bits of
register C are preserved and the C register is written to the targeted board.
[2]! 90%
The PD out field of register C (bits C 3 and C 2 ) is set to 10 binary while the remaining bits of
register C are preserved and the C register is written to the targeted board.
[3]! 100%
The PD out field of register C (bits C 3 and C 2 ) is set to 11 binary while the remaining bits of
register C are preserved and the C register is written to the targeted board.
[2] Change PD out current with Output A NOT defined as port (not available on '220)
To access this command in the program, select a board in the "Define boards to program" screen
and then press [Q]! . This will place you in the "Select from the available options" screen. Press [N],
which will place you in the "Change C Register" screen. The command [2] is on this screen.
[0]! 25%
The PD out field of register C (bits C 3 and C 2 ) is set to 00 binary while the remaining bits of
register C are preserved and the C register is written to the targeted board.
[1]! 50%
The PD out field of register C (bits C 3 and C 2 ) is set to 01 binary while the remaining bits of
register C are preserved and the C register is written to the targeted board.
[2]! 75%
The PD out field of register C (bits C 3 and C 2 ) is set to 10 binary while the remaining bits of
register C are preserved and the C register is written to the targeted board.
[3]! 100%
The PD out field of register C (bits C 3 and C 2 ) is set to 11 binary while the remaining bits of
register C are preserved and the C register is written to the targeted board.
MOTOROLA
Freescale Semiconductor, Inc.
For More Information On This Product,
Go to: www.freescale.com
MC145220EVK
41
Advertisement
Table of Contents
