Change C Register And Prescale - Motorola MC145220EVK Manual

Change C Register and Prescale

ARCHIVED BY FREESCALE SEMICONDUCTOR, INC. 2005
This is the resulting screen that is displayed after the user selects the '[N] Change C Register and Pres-
cale' command. The user is provided a submenu to select from. Each submenu option also shows a
submenu. Note that in '220 dual mode, some options are deleted. This is notated with the [–] symbol.
Available Boards – Current target board is: A, MC145220 Dual
Brd [A]!: MC145220 Dual
––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
Change C register:
[–] PDout Current Step Size
[–] Output B – (Out B)
[2] PDout Current – (PDout)
[3] Phase Detector Select – (PDA/B)
[–] Lock Detect Enable – (LDE)
[5] Phase Detector Polarity – (POL)
[6] Standby – (STBY)
Change Prescale:
[7] Prescale
[Q] to return to main menu
This screen shot is a representative sample of the screens within this program. To access this screen
with the MC145220 Dual EVK selected in the "Define boards to program" screen, press [Q]! . This will
place you in the "Select from the available options" screen. To access the screen shown above, press
[N].
MC145220EVK
26
Freescale Semiconductor, Inc.
Welcome to MC145xxx EVK Demonstration Program, rev 4.0
Change C Register and Prescale
Brd [–]!: N/A
[X]! Terminate demonstration program. [?]! View help screen.
For More Information On This Product,
Go to: www.freescale.com
Brd [–]!: N/A
MOTOROLA