Steering Valve Service; Disassembly - Toro Reelmaster 5500-D Service Manual

Steering Valve Service

Disassembly

Note: Cleanliness is extremely important when
repairing steering control units. Work in a clean area.
Before disconnecting the hydraulic lines, clean the port
area of the steering control unit. Before disassembly,
drain the oil, then plug the ports and thoroughly clean the
exterior. During repairs, always protect machined sur-
faces.
Steering and Brakes
Figure 21
1. Remove the seven capscrews and disassemble the
steering control unit as shown (Fig. 21).
2. Remove the plug and check ball.
Page 7 - 18 Reelmaster 5500-D