Specifications; Specifications - Toro Reelmaster 5500-D Service Manual

Specifications

Item
Hydraulic Transmission
System Relief Pressure (Forward)
System Relief Pressure (Reverse)
Charge Pressure
Cooler By-pass Pressure
Filter By-pass Pressure
Oil Filter
In-line Strainer
Gear Pump
Maximum Operating Pressure
Steering Relief Pressure
Hydraulic Manifold (Reel)
Front Reels Circuit Relief Pressure (R1)
Rear Reels Circuit Relief Pressure (R2)
Reel Motors
Maximum Operating Pressure
Hydraulic Filter (Reels, Lift, and Steering Circuits)
Hydraulic Reservoir (Reels, Lift, and Steering Circuits)
Hydraulic Oil
Hydraulic Reservoir in Differential Housing (Transmission)
Hydraulic System (Rev. C)
3 section, positive displacement gear type pumps
Spin-on cartridge type with 50 psi internal bypass
See Check Hydraulic System Fluid in General Information section
Page 4 - 2
Specification
Sauer-Sundstrand M25, U-type
3625 PSI (249.9 bar)
2755 PSI (190 bar)
150 PSI (10.3 bar)
70 PSI (4.8 bar)
70 PSI (4.8 bar)
Screw-on type
260 micron, 8 GPM (30.3 LPM)
3000 PSI (207 bar)
1450 PSI (100 bar)
3000 PSI (207 bar)
2000 PSI (138 bar)
Gear motor
3000 PSI (207 bar)
8.5 gal. U.S. (32.2 L)
5.0 qts. U.S. (4.7 L)
Reelmaster 5500-D