Toro Reelmaster 5500-D Service Manual page 211

3. Slide the spool and sleeve from the housing
(Fig. 22).
4. Remove the thrust bearing and bearing races.
5. Remove the quad seal.
6. Use a small blade screwdriver to carefully pry the
dust seal from the housing. Be careful to not damage the
dust seal seat.
7. Remove the pin that holds the spool and sleeve
together (Fig. 23).
8. Carefully slide the spool out of the sleeve. The
springs and retaining ring will stay with the spool as it is
removed.
9. Remove the retaining ring and springs.
CAUTION
The centering springs are under tension. Re-
move the retaining ring carefully.
Reelmaster 5500-D
Figure 22
Page 7 - 19
Figure 23
Steering and Brakes