Safety; Acs800-02, Acs800-U2; Acs800-07, Acs800-U7; Acs800-17 - ABB ACS800 Series Hardware Manual

10

Safety

Only qualified specialists are allowed to install, commission and maintain the safety
options.
WARNING! Follow the safety instructions when installing, operating and servicing
the drive. If ignored, physical injury or death may follow, or damage may occur to the
drive, motor or driven equipment. Read the safety instructions before you work on
the unit.

ACS800-02, ACS800-U2

Follow the safety instructions given in ACS800-02/U2 Hardware Manual
[3AFE64567373 (English)].

ACS800-07, ACS800-U7

Follow the safety instructions given in ACS800-07/U7 (45 to 560 kW) Hardware
Manual [3AFE64702165 (English)] or ACS800-07 (500 to 2800 kW) Hardware
Manual [3AFE64731165 (English)].

ACS800-17

Follow the safety instructions given in ACS800-17 Hardware Manual
[3AFE68397260 (English)].

ACS800-37

Follow the safety instructions given in ACS800-37 Hardware Manual
[3AFE68557925 (English)].

Units with earth fault monitoring for IT (ungrounded) systems (+Q954)

Follow the safety instructions given in IRDH275 Operating Manual by Bender (code:
TGH1386) in addition to the safety instructions given in the drive hardware manual.

Finding the instructions of a specific drive type

Instructions in this manual are categorized according to the converter module frame
size: R6, R6i, R7, R7i, R8 or n×R8i. The frame size is not marked on the drive
designation label. To identify the frame size, see the rating tables in the drive
hardware manual. As a general rule,
• ACS800-02 and ACS800-U2 units are of frame size R7 or R8
• ACS800-07 units in the power range from 45 to 560 kW and ACS800-U7 units in
the power range from 50 to 600 HP are of frame size R6, R7 or R8
• ACS800-07 units in the power range from 500 to 2800 kW are of frame size
n×R8i
• ACS800-17 and ACS800-37 units are of frame size R6i, R7i or n×R8i.
About this manual