Connecting; General Information And Procedures - Siemens SITRANS DA400 Operating Instructions Manual

Process monitoring with protection against explosion

Hide thumbs Also See for SITRANS DA400:

Table of Contents

Connecting

5.1

Safety information

Warning

To ensure safe operation of this device, it must be properly installed and commissioned by

qualified personnel in adherence to the warning information. This includes both the general

safety regulations for working on high voltage systems (e.g. DIN VDE) and the regulations

relating to proper use of tools and the use of personal protective equipment (goggles,

protective gloves etc.).

Caution - the current is to be shut off before opening the device. Non-compliance can result

in death, severe physical injury and/or significant damage.

Note

All connecting leads inside the device should be kept short.

To ensure the degree of protection according to IP65 for the device, only the permissible

cable diameters may be used.

SITRANS DA400 with protection against explosion

Operating Instructions, 02/2006, A5E00684661-01

5-1

Table of Contents