Siemens SITRANS DA400 Operating Instructions Manual page 35

6.4 Parameter menu
6.4.1 Parameter table
Parameter Parameter
no. name
P. 0 SWREV
P. 1 SoCH1
P. 2 SoCH2
P. 3 SoCH3
P. 4 SoCH4
P. 5 PrAL1
P. 6 AL1
P. 7 PrAL2
P. 8 AL2
P. 9 PrAL3
P.10 AL3
P.11 PrAL4
P.12 AL4
P.13 TIME
P.14 AcK
P.15 doPR1
P.16 doAL1
P.17 doPR2
P.18 doAL2
P.19 doPR3
P.20 doAL3
P.21 doPR4
P.22 doAL4
P.23 doFAI
P.24 doFAu
P.25 P ouT
SITRANS DA400 with protection against explosion
Operating Instructions, 02/2006, A5E00684661-01
Adjustment/display range
1.00
oFF, on L, on H
oFF, on L, on H
oFF, on L, on H
oFF, on L, on H
0 to 9999
0 to 9999
0 to 9999
0 to 9999
0 to 9999
0 to 9999
0 to 9999
0 to 9999
0 to 1000
oFF, ¬St.Ac, St.Ac
oFF, do1, do2, do3, do4, do5,
do6, ¬do1, ¬do2, ¬do3, ¬d04,
¬do5, ¬do6
As P.15
As P.15
As P.15
As P.15
As P.15
As P.15
As P.15
As P.15
As P.15
PoS / inv
Factory Comment
setting
SW version (not adjustable)
oFF Acoustic channel 1
on L: Substitute value 0 for sensor fault
on H: Substitute value 10000 for sensor fault
oFF Acoustic channel 2 / See P.1
oFF Acoustic channel 3 / See P.1
oFF Acoustic channel 4 / See P.1
9999 Pre-alarm channel 1
9999 Main alarm channel 1
9999 Pre-alarm channel 2
9999 Main alarm channel 2
9999 Pre-alarm channel 3
9999 Main alarm channel 3
9999 Pre-alarm channel 4
9999 Main alarm channel 4
0 Response time for alarms coming from
acoustic channels in seconds
oFF Type of alarm acknowledgement:
oFF: Alarm not stored, no acknowledgement
¬St.Ac: Alarm not stored, acknowledgement
stops until next response
St.Ac: Alarm stored, acknowledgement stops
until next response
oFF Status signal assignment:
Pre-alarm 1 to hardware output
(do : digital output / ¬ : inverse)
do1 Main alarm 1
oFF Pre-alarm 2
do2 Main alarm 2
oFF Pre-alarm 3
do3 Main alarm 3
oFF Pre-alarm 4
do4 Main alarm 4
oFF Input fault summation signal
oFF Internal fault summation signal
PoS Output polarity
Operation
6.4 Parameter menu
6-7