Disconnecting The Probe - GE Vivid S5 User Manual

Disconnecting the probe

Probes can be disconnected at any time. It is recommended
that the probe should not be active when being disconnected.
To disconnect a probe (small connector -
type RS)
1.
2.
3.
4.
5.
6.
To disconnect a probe (large connector -
type OR)
1.
2.
3.
Vivid S5/Vivid S6 User Manual
R2424458-100 Rev. 2
Freeze the image by pressing
Press the connector locking lever towards the left to unlock
the connector.
Pull the probe and connector straight out of the probe port.
Carefully slide the probe and connector away form the
probe port and around the right side of the keyboard.
Ensure that the cable is free.
Verify that the probe head is clean before placing the probe
in its storage case.
Rotate the lock handle counter-clockwise to the horizontal
position to unlock the connector.
Pull the connector straight out of the probe port.
Verify that the probe head is clean before placing the probe
in its storage case.
Probes
.
FREEZE
551