Disconnecting The Probe; Probe Discussion - GE LOGIQ E9 User Manual

Disconnecting the Probe

Probe Discussion

CAUTION
–
LOGIQ E9 User Guide
Direction 5454884-100 English Rev. 1
Probes can be disconnected at any time. However, the probe
should not be active when disconnecting the probe.
1. Ensure the probe is deactivated. Deactivate by selecting
another probe or pressing Freeze.
2. Move the probe locking handle to the left.
3. Pull the probe connector straight out of the probe port
carefully.
4. Carefully slide the probe and connector away from the
probe port and around the right side of the keyboard.
5. Ensure the cable is free.
6. Be sure that the probe head is clean before placing the
probe in its storage box or wall hanging unit.
7.
The LOGIQ E9 supports the following types of probes:
• Matrix Array. Matrix Array probes.
• Convex Array. Convex Array probes.
• Linear Array. Linear Array probes.
• Micro Convex Array. Micro Convex Array probes.
• Sector Phased Array. Sector Phased Array probes.
• Volume Probes. 4D probes: Convex Array, Micro Convex
Array, Linear Array.
Probes for transvaginal and transrectal applications require
special handling. Transvaginal/transrectal examinations and
probe insertions should be performed only by personnel with
adequate training. Refer to the user documentation enclosed
with these probes.
Probes
1-31