GE LOGIQ E9 User Manual page 50

Getting Started
Sector Probes (continued)
CAUTION
6Tc Probe
Non-Imaging CW Probes
Probe Indications for Use
P2D • Adult Cephalic
• Cardiac
• Peripheral Vascular
P6D • Adult Cephalic
• Cardiac
• Peripheral Vascular
1-38
Transesophageal probes require special handling. Refer to the
user documentation (KZ192871) enclosed with these probes.
The maximum insertion portion width of 6Tc shall not be larger
than 14 +/- 0.22mm.
After the probe has been selected, the scan plane positioning
system automatically calibrates. This calibration cycle lasts 10 to
15 seconds. After the calibration is completed, the probe
temperature sensor is activated, and the probe temperature is
displayed. A message appears on the system display to remind
the user of the importance of using a bite guard when
conducting a TEE examination. When the message disappears
and the calibration cycle is completed, the probe is ready for
operation.
In case the initialization of the probe fails (no response from the
scan plane buttons after initialization), re-select the probe to
repeat the initialization routine.
Table 1-11:
Capabilities and Features
• Scan Assistant
• CW
• Speed of Sound
• Compare Assistant
• Scan Assistant
• CW
• Speed of Sound
• Compare Assistant
CW Probes
LOGIQ E9
Direction 5454884-100 English Rev. 1
Illustration
–
User Guide