Location Of Measurement Controls - GE LOGIQ E9 User Manual

Location of Measurement Controls

–
LOGIQ E9 User Guide
Direction 5454884-100 English Rev. 1
Figure 2-2. Locating Measurement Controls
1. Measure. Activates a measurement caliper and the calculation package
associated with the currently selected preset.
2. Clear. During a measurement sequence, erases the measuring caliper
and measurement data from the display. When not performing a
measurement sequence, clears all calipers and measurements from the
display. To remove all annotations/body markers/arrows, hold down the
Clear button.
3. Ellipse. After the first caliper for a distance measurement has been set
and the second caliper positioned, Ellipse activates the area/ellipse
measurement function. During the ellipse adjustment, use the Trackball
to increase or decrease the size of the ellipse. Select Cursor Select to
adjust the measurement calipers.
4. Trackball. Moves the measurement calipers, selects the measurement
on the Summary Window. Trackball also selects items on the Touch
Panel with the Pointer and Set keys.
5. Trackball Keys. The functionality of these keys changes (e.g. Set, Mode
Cursor, etc) depending on the mode or action. Current functionality is
displayed on the lower-right corner of the monitor.
6. Pointer Key. Select to display a pointer on the monitor.
Measurement and Analysis
2-17