GE LOGIQ E9 User Manual page 99

Body Patterns
–
LOGIQ E9 User Guide
Direction 5454884-100 English Rev. 1
To activate body patterns, press the Body Pattern/Ellipse
control. A maximum of 6 body pattern packages are displayed
on the Touch Panel according to exam category and preset.
Select the desired body pattern on the Touch Panel. The
selected body pattern is displayed on the monitor.
Press the Move Pattern control on the Touch Panel to
reposition the body pattern with the Trackball and Set controls.
A probe mark is associated with the body patterns and illustrates
the probe position on the body pattern. This marker can be
placed with the Trackball and rotated with the Ellipse control.
The probe mark type is selectable by rotating the Probe Type
control on the Touch Panel. There are different choices available
with one being a blank selection.
To select the active side in dual B-Mode, use the Active Side
rotary control at the bottom of the Touch Panel.
To clear the body pattern, press the Body Pattern/Ellipse
control to activate body patterns and then press the Clear key.
Press Set on the keyboard or Scan on the Touch Panel to exit
without erasing the body pattern.
Optimizing the Image
2-13