GE LOGIQ E9 User Manual page 187

Cleaning Instructions
NOTE:
–
LOGIQ E9 User Guide
Direction 5454884-100 English Rev. 1
To clean the operator control panel:
1. Lock the Operator Panel controls via the Keyboard Lock
rotary on the Utility Touch Panel.
Figure 3-15. Utility Touch Panel
After pressing Keyboard Lock, the following pop-up
message appears.
Figure 3-16. Keyboard Locked Warning
2. Moisten a soft, non-abrasive folded cloth with a mild,
general purpose, non-abrasive soap and water solution.
3. Wipe down operator control panel.
4. Use a cotton swab to clean around keys or controls. Use a
toothpick to remove solids from between keys and controls.
System Care and Maintenance
3-61