Table of Contents
Advertisement
Operator:
Viewer:
No Access:
Note:
An Administrator account must be set before setting up either an Operator or
Viewer account.
IP Filter
Use this feature to ensure that the user only login from the IP address specified
here. Leave it as *.*.*.* to allow the user to login from any place.
Example:
Entering 192.168.1.* will only allow User to access from 192.168.1.xxx IP
addresses.
Max FPS
This allows the Administrator to limit the bandwidth allocated to each account.
The Administrator can set a figure of 1 to Unlimited FPS ("frames per second").
Viewing Hours
When the Permission level is set to either Operator or Viewer, the Administrator
can set the time to which the camera can be viewed.
ASUS Mimic - user manual
permission to all menus and sub-sections.
Administrator can see the User Name and IP address
fields or set the camera access Permit Hours to
Operator or Viewer accounts.
The user can access all menus, but does not have
permission to amend the data fields.
The user can only view camera within the time specified
in Permit Hours.
permission, can only view Camera A/B and read the
Information section.
This disables either of the above two permission levels
given to a user.
Chapter 3: Web Interface
The user does not have write
Only an
-17-
Advertisement
Table of Contents
