Ip Address; Advanced (For Password And Http Configuration) - Asus Mimic CX-200 User Manual

Hide thumbs Also See for Mimic CX-200:

Table of Contents

2.3.1 IP Address

Use this section to configure the IP Address of ASUS Mimic.

Obtain an IP address by DHCP

Choose this if you want your Router to assign an IP address to ASUS Mimic.

This is the default setting.

Obtain an IP address by Bootp

Choose this if you want to allow ASUS Mimic to obtain an IP address using Bootp

protocol.

Use the following IP Address

Choose this if you want to assign a fix IP address, Subnet Mask and Gateway for

ASUS Mimic. (Refer to Appendix C for explanation on IP Addresses)

This section sets the Utility password. This security password prevents unauthorised

access to devices through this Utility.

Note:

Device Password can only be set for ASUS Mimic from within the same LAN.

ASUS Mimic - user manual

Fig.49. IP Configuration: IP Address

Chapter 5: Using the Utility Program

-45-

Table of Contents