Asus Mimic CX-200 User Manual page 35

Hide thumbs Also See for Mimic CX-200:
Table of Contents

Advertisement

Time Zone (Relative to GMT)
Select the appropriate time zone. Click Apply to save changes.
System Time (yyyy/mm/dd hh:mm:ss)
This section is to manually set ASUS Mimic System Time. The format is
pre-determined to: yyyy/mm/dd hh:mm:ss (in 24hr format).
Adjust to save the changes.
ii.
System Restart
Auto Restart System Every ...
The Administrator can choose to restart ASUS Mimic at certain intervals (choose
between minutes and hours only). Click Apply to save any changes.
Manual Restart
Click Restart Now to restart the system immediately.
iii.
LED Settings
LED function
This function is not applicable.
iv.
SNMP Settings
System Name
This is to give ASUS Mimic a name identifiable in a SNMP network.
System Contact
This is to give the Administrator an identity in the SNMP network.
ASUS Mimic - user manual
Fig.43. Auto Restart setting
Fig.44. LED Settings
Fig.45. SNMP Settings
Chapter 3: Web Interface
Click Manual
-32-

Advertisement

Table of Contents
loading

Table of Contents