Table of Contents
Advertisement
D-Link (http://www.dlink.com)
DI-604/DI – 614+/DI-624
1. Log into your router using your router IP.
2. On the main page, click on Advanced at the top of the page.
3. On the left side of the page, click on Virtual Server. Note: Make sure DMZ host is
disabled. If DMZ is enabled, it will disable all Virtual Server entries.
4. Enter the following information on the page:
Enable/Disable:
Name:
Private IP:
Protocol Type:
Private Port:
Public Port:
Schedule:
5. Click Apply to save the settings.
6. Enter the following information on the page:
Enable/Disable:
Name:
Private IP:
Protocol Type:
Private Port:
Public Port:
Schedule:
7. Click Apply o save the settings. ASUS Mimic should now be configured to work
with your router and be accessible from the internet.
DI-704/704P
1. Log into your router using your router IP.
2. On the main page, click on Advanced at the top of the page.
3. On the Virtual Server page, enter the following information;
For ID#1:
Service Port:
Service IP:
ASUS Mimic - user manual
Enabled
ASUS Mimic - Webpage
Type in the camera's IP address, for example: 192.168.0.5
TCP
80
80
Always
Enabled
ASUS Mimic - Webpage
Type in the camera's IP address, for example: 192.168.0.5
UDP
9001
9001
Always
80
Type in the camera's IP address, for example: 192.168.0.5
Appendix A: Router Configuration
-73-
Advertisement
Table of Contents
