Asus Mimic CX-200 User Manual page 43

Choose this if you want to enter a fix IP address, Subnet Mask and Gateway for
ASUS Mimic. (Refer to Appendix C for explanation on IP Addresses)
Obtain an IP address by Bootp
Choose this if you want to allow ASUS Mimic to obtain an IP address using Bootp
protocol.
5. Click Next > to proceed to xDSL/Cable modem setup.
Choose this if you want ASUS Mimic to connect directly to your xDSL line.
a. Select Enable PPPoE connection
b. Enter your account and password details as provided by your internet service
provider ("ISP").
c. ASUS Mimic will be able to dial-up automatically once setup is completed.
6. Click Next > to proceed with DDNS setup
ASUS Mimic - user manual
Chapter 5: Using the Utility Program
-40-