Table of Contents
Advertisement
Schedule
When the unit is set to On Schedule, the Administrator can configure the four
preferred schedule time slots for motion detection. Time must be entered in
24hr format.
Send to FTP Server
Click Yes to activate. This option allows the administrator to send and store
the motion detected images on a FTP site. This is useful for future reference
and recording purpose.
ftp://<empty>/<folder>
This allows the Administrator to determine the folder where the Motion Detected
files are stored. Enter a folder name in <folder>. Click Apply when done.
Note:
The folder name must be valid and has appropriate upload permissions.
You must first enter a valid FTP address in Email / FTP page. Otherwise the ftp
address field will be left <empty>.
To setup the FTP server, see Section 2.4.4
System Defined / User Defined
The administrator can also determine to either have the system automatically
assign the filenames for the pictures saved. Or manually assign the filename.
Filename ...
Specify a prefix filename for the motion detected JPG images. The default
prefix is image_
Loop from ... to ...
This will determine the number of files in the sequence. Once the last file
number is reached, it'll loop and replace the first file in the sequence with the
most current image.
Digits ...
This will determine the number of digits assignable for the above sequence.
The Administrator can choose to assign between 1 to 6 digits.
Click
for an example.
Send Email
Select Yes to send an email when motion is detected.
Note:
The image size received by email / FTP depends on the resolution set in Basic
Settings
Camera Settings
ASUS Mimic - user manual
Image Size
Chapter 3: Web Interface
-24-
Advertisement
Table of Contents
