REMOVAL AND INSTALLATION
REMOVAL OF THE HEATING FAN
Completely lower the working equipment until it is
resting on the ground and stop the engine and take
out the ignition key.
H Drain the engine coolant.
Coolant: approx. 4
1 - Remove the floor mat.
2 - Remove screws (1).
3 - Loosen screws (2) and take out the cover (3).
4 - Remove the travel increment pedal (4).
5 - Remove the L.H. lower cover (for details, see «RE-
MOVAL OF THE L.H. LOWER COVER») and remove
the swivel pin (5).
6 - Disconnect the return tube (6) and delivery tube (7) to
heating fan.
H Plug the tubes to prevent entry of impurities.
7 - Loosen screws (8) (N
move the complete fan (10).
H Accompany the tubes (6) and (7) to avoid to da-
mage them.
H Take care not to take out completely the tube (6)
and (7) from engine box.
8 - Disconnect the connector (11).
9 - Loosen the clips (12) and take out the tubes (6) and
(7).
10 - Remove the heating fan (13).
PC20R-8 PC27R-8
,
. 2), remove cover (9) and re-
o
1
5
3
4
6
10
8
11
12
HEATING FAN
2
RKPA2800
7
RKPA2810
9
RKPB5530
13
6
7
RKPA2830
30-19