Removal - Komatsu PC20R-8 Shop Manual

REMOVAL AND INSTALLATION
REMOVAL OF FUEL TANK
Completely lower the working equipment until it is
resting on the ground and stop the engine.
H Drain the fuel.
Fuel: max. 35
1 - Remove the hood (1). (For details, see «REMOVAL
OF LATERAL LOWER COVER»).
2 - Disconnect the tube (2) and suction tubes (3).
H Mark the tubes to avoid exchanging them during
re-installation.
3 - Loosen the clip (4), the screws (5) and take out the
fuel filling (6).
4 - Disconnect the connector (7) and loosen lock screws
(8) (N . 4) of the fuel tank (9).
o
5 - Remove the fuel tank (9).
Fuel tank: 14 kg
INSTALLATION OF THE
FUEL TANK
. To install, reverse the removal procedure.
1 - Fill up the tank.
Tank: max. 35
2 - Bleed the air from the fuel pipes and start the engine.
30-22
,
,
1
5
6
4
3
7
8
9
FUEL TANK
RKPA2850
2
RKPA2860
RKPA2870
PC20R-8 PC27R-8