Siemens SIREMOBIL Iso-C Service Instructions Manual page 15

Replacing the horizontal lift brake
•
Secure the cable bundle with cable ties at the points indicated (bold lines /Fig. 30):
- at connector X22
- at connector X23
- in front of the bracket (Fig. 30/3)
•
Reconnect plugs X22 and X23 (4/Fig. 30).
•
Route the cables to microswitches S3 and S4 and connect them
(2/Fig. 31).
•
Secure the cables to the microswitches to the side of the plate with cable ties (2/Fig. 31).
Siemens AG
Medical Engineering
SPR2-230.076.01
Rev. 01 02/99
Page 15 of 16 SIREMOBIL Iso-C
TD SD 24
15