Siemens SIREMOBIL Iso-C Service Instructions Manual page 2

2
General
Safety information
When performing service work and tests, adhere to the product-specific safety information
in the documents as well as the general safety information contained in Register 2 of the
TI folder.
Miscellaneous information
These instructions describe the replacement of the horizontal lift brake on the SIREMO-
BIL Iso-C.
Required parts
•
Magnetic brake
Required measurement and auxiliary devices
•
Protective conductor meter
or
•
Bender Safety tester
Required tools
•
Standard service kit
•
1 set of Allen keys
•
1 Ratchet
•
1 nut with a 30mm socket
•
Spring scale to 200N
•
Loctite 648
Additional auxiliary devices
•
Block of hard wood, approx. 80mm x 60mm x 60mm (Height x length x width)
•
Work table approx. 850mm x 1800mm x 800mm (height x length x width) with a bearing
capacity of > 1200N.
or
2 work tables approx. 850mm x 1000mm x 600mm (height x length x width) with a
bearing capacity of > 600N.
SIREMOBIL Iso-C
Replacing the horizontal lift brake
(Item number: refer to the SIREMOBIL Iso-C spare parts
list)
44 15 899 RV090
97 06 979 Y0526
20 48 601
SPR2-230.076.01
Rev. 01 02/99
Page 2 of 16
TD SD 24 Medical Engineering
1
1
1
1
1
1
1
Siemens AG