Siemens SIREMOBIL Iso-C Service Instructions Manual page 4

4
2
3
Fig. 2
Fig. 4
•
Remove the lower cover (1/Fig. 2). Loosen the screws only (2/Fig.2), but do not remove
them.
•
Remove the back cover (3/Fig. 2) (Velcro closure).
•
Remove the upper cover plate (1/Fig. 3). Also remove the cable ties and the fastener
clamps (2/Fig. 3)
•
Remove the back cover (1/Fig. 4).
•
Remove the guide bearings (1/Fig. 5).
•
Remove plug connections X22 and X23 (2/Fig.5).
•
Remove the cable clamps (3/Fig.5).
•
Remove the cable guide (4/Fig.5).
SIREMOBIL Iso-C
Replacing the horizontal lift brake
1
1
Fig. 3
3
1
Fig. 5
SPR2-230.076.01
Rev. 01 02/99
2
S3
4
2
Page 4 of 16
TD SD 24 Medical Engineering
1
S4
5
Siemens AG