Bim - Huawei FusionModule500 Manual

FusionModule500 Smart Mini Data Center
Product Description (ECC800e)
Default Button
Table 3-39 Default button description
Name
Default button

3.4.7.2 BIM

The BIM is a battery monitoring module that monitors the voltages, internal resistances, and
pole temperatures of batteries and supports 12 V power.
Features



Appearance
Figure 3-27 BIM
Indicators
Table 3-40 Indicator description
Indicator
Running
Issue 01 (2017-04-20)
Definition
Hold down the button
for more than 10
seconds.
Monitors the voltages, internal resistances, and pole temperatures of batteries.
Supports the hibernation function. (When it detects that the battery voltage is low, it will
enter the low-power mode.)
Communicates with the CIM in wireless mode.
Color Silk
Screen
Green RUN
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Function
Reset to the default IP address
(192.168.0.10)
Status Description
Off Power consumption is low or the
BIM is not powered on.
Blinking at The networking has started but not
completed.
super short
3 System Architecture
56