Huawei FusionModule500 Manual page 45

FusionModule500 Smart Mini Data Center
Product Description (ECC800e)
Item
(RJ45)
USB
Buttons
Table 3-19 Indicators on the ECC800e main control module
Indicator
RUN
ALM
PWR
Issue 01 (2017-04-20)
Specification
of 20 W, maximum withstand voltage of 60 V DC, and rated
current of 0.5 A.
 Supports one active DO port with the output voltage of 12 V DC
and output current of 450 mA.
Supports USB 2.0 and provides four USB ports for connecting
devices.
 SW: wireless network pairing button.
 Default: button of restoring the default IP address.
Color Name
Green Module running
status indicator
Red Alarm indicator
Green Power indicator
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 System Architecture
Status Description
Steady on The power supply is normal,
the program is being loaded,
or WiFi WPS is pairing.
Off The power supply is
abnormal.
Blinking The software runs properly
at long (the indicator blinks at 0.5
intervals Hz, on for 1s and then off
for 1s) or the ECC800e
registers with the NetEco
successfully.
Blinking The ECC800e does not
at short register with the NetEco (the
intervals indicator blinks at 4 Hz, on
for 0.125s and then off for
0.125s).
Steady on A system failure alarm is
generated.
Off The system is normal.
Steady on The power supply for the
system is normal.
Off The power supply for the
system is abnormal.
39