Manual Control On Ir Channels; Relation Between Ir Channels And Dali Groups - Philips OccuSwitch DALI LRM2070 User Manual

2 .3 .5

Manual control on IR channels

Manual control on IR channels can be done through 5
different channels, as shown in the following table:
IR channel Description
Channel 1 Window, corridor and additional presence
(Default) luminaires .
When manually setting the light level, the
corridor and additional presence luminaires
will follow the window channel with an
offset . Daylight override may cause window
luminaires to stay off .
Channel 2 Window luminaires
Channel 3 Corridor luminaires
Channel 4 Extra auto on
Channel 5 Additional absence luminaires
Table 10: Manual control channels
By default the remote control IRT8050 and IRT9010 are
set to channel 1, simultaneously controlling window,
corridor and additional presence luminaires . Only the
IRT8050 can be configured to use other channels . For
setting the infrared channels, see the datasheets of this
remote .
2 .3 .6

Relation between IR channels and DALI groups

It is important to know that the IR channels in our remote
controls are used in a different way than originally
designed for other systems . There is therefore no direct
relation between Output rows, IR channels and DALI
groups . Here you can find an overview between the three
and please be aware that you do not need to program this
relation yourselves as the system does it all by itself .
Output row
Window + Corridor +
Extra Auto On
Window luminaires
Corridor luminaires
Extra auto on
Additional absence
luminaires
For details please contact your Philips representative .
OccuSwitch DALI
User Guide
Page 17
IR channel DALI group
1 1 + 2 + 3
2 1
3 2
4 3
5 4