Dismantling And Fitting; Introduction - ABB A145-M56 Operation Manual

Operation Manual / 4 Product description / A130-M.. - A145-M..
8

Dismantling and fitting

8 Dismantling and fitting
8.1

Introduction

The precondition for the work described in the following is a turbocharger removed from the
engine (see chapter Removal and installation).
Danger of burns
Touching hot surfaces or contact with hot operating fluids can cause burns.
Do not touch hot surfaces. Observe the warning plate on the turbo-

WARNING
charger.
Wear heat-resistant safety gloves and protective clothing.

Wait for the turbocharger to cool down before carrying out any work.

Wear safety gloves to protect against thermal hazards.
Cutting injuries when working on the turbocharger
Some parts on the turbocharger may have sharp edges. There is a risk of a
cutting injury.
WARNING
Wear safety gloves against mechanical risks when conducting assembly

and disassembly work.
Wear safety gloves to protect against mechanical hazards.
Further operations
This Operation Manual may be used to carry out only those operations that
are described in it. Further operations that are executed in an incorrect way
CAUTION
can lead to serious damage to the machine.
ABB Turbo Systems recommends having further operations carried out

only by trained personnel from an ABB Turbocharging Service Station.
Mark the casing position for assembly.

© Copyright 2017 ABB. All rights reserved. HZTL4031_EN
Page 73 / 121
Revision E January 2017