Table 42 Tightening Torque (72011) - ABB A145-M56 Operation Manual

Operation Manual / 4 Product description / A130-M.. - A145-M..
8 Dismantling and fitting
Installing the compressor casing
Figure 49: Installing the compressor casing
Part number
72011
Table 42: Tightening torque (72011)
1. Fit a new O-ring (42012).
2. Thoroughly clean the fastening strips (72012) before assembly.
3. Attach swivel lifting eyes (S) to compressor casing (72000). Secure lifting gear to the swiv-
el lifting eyes.
4. Install the compressor casing (72000).
5. Install the fastening strips (72012) with screws (72011). Observe the tightening torque. If
these screws do not have a Verbus Ripp® integrated, Verbus Ripp® washers (72010)
must also be fitted.
© Copyright 2017 ABB. All rights reserved.
A130 A135
M8 M10
35 Nm 70 Nm
HZTL4031_EN
Page 98 / 121
A140 A145
M12
105 Nm 170 Nm
Revision E
M14
January 2017