Kenwood DDX396 Instruction Manual page 19

Radio Radio
6 Displays/hides other available operation keys*
7 TI indicator
8 ST/MONO indicator
The ST indicator lights up when receiving an FM
stereo broadcast with sufficient signal strength.
9 Seek mode indicator
p Operation keys*
See the following "Operation keys on source control screen".
Operation keys on source control screen
• The appearance of the operation keys may differ,
however the similar operation keys have the same
operations.
• See also "Common operation keys on source control
screen" on page 8.
Touching the operation keys performs the following
actions:
6
(Hold) Presets stations automatically.
[AME ]
[MONO]* Activates monaural mode for better FM
reception (stereo effect will be lost).
• The MONO indicator lights up while
monaural mode is activated.
• To deactivate, touch [MONO] again.
[TI]* (For FM RBDS features)
Activates TI standby reception mode.
• When TI is activated, the unit is ready
to switch to traffic information if
available. The TI indicator lights up in
white.
• If the TI indicator lights up in orange,
tune into another station providing
Radio Broadcast Data System signals.
• The volume adjustment for Traffic
Information is automatically
memorized. The next time the unit
switches to Traffic Information, the
volume is set to the memorized level.
• To deactivate, touch [TI] again.
p
[PTY]* (For FM RBDS features)
Enters PTY search mode.
1 Touch [PTY].
2 Touch and hold a PTY code to search
for.
If there is a station broadcasting a
program of the same PTY code as you
have selected, that station is tuned in.
[SEEK] Changes the seek mode for [
• AUTO1 (Initial): Auto search
• AUTO2: Tunes in preset stations one
after another
• MANU: Manual search
[ S ]/[ T ] Searches for a station.
• The search method differs according
to the selected seek mode (see above).
* Appears only when FM is selected as the source.
Presetting stations in the memory
You can preset five stations for each band.
Automatic presetting — AME (Auto
Memory)
On the source control screen, touch as follows:
The local stations with the strongest signals are found
and stored automatically.
Manual presetting
1
Tune in to a station you want to preset.
S ]/[ T ].
2
Select a preset number to store into.
Radio
E.g. Radio source control screen for DDX396
The station selected in step 1 is stored into the
preset number [P1] to [P5] you have selected.
(Hold)
P1
(Hold)
ENGLISH 17